Axle painting and Jeep Hood History!

Posted on April 10, 2020March 13, 2021 by Britt

Axle painting and Jeep Hood History!

This week more work was done to the front wartime axle including painting, disassembling the steering rods, etc. Then it started to rain in SoCal, so I shifted my focus to something I’ve been meaning to do for a while… wet sand the hood to find if there were any original markings from WW2 on the Jeep! This yielded some amazing and surprising results on the Jeep’s history. But, I need some help to decipher the numbers! This is a big update!

Continue reading “Axle painting and Jeep Hood History!” →

Adding Glass Stencils, Axle work, and a Jeep model!

Posted on April 4, 2020April 12, 2021 by Britt

Adding Glass Stencils, Axle work, and a Jeep model!

This week didn’t see as much done as last week, and had it’s share of ups and downs with the axles, but still much done! I added the Ford Safety Glass markings to my windshield glass (full tutorial), continues working on the axles and drums, and then took a day to restore a ‘different’ kind of Jeep!

Continue reading “Adding Glass Stencils, Axle work, and a Jeep model!” →

Quarantine work!

Posted on March 26, 2020April 12, 2021 by Britt

Quarantine work!

This week was one of the busiest weeks I’ve had in a long time during this restoration, mostly because of the current stay-at-home quarantine. The e-brake project was mostly finished, I sandblasted and finished all four brake assemblies for the new axles, and wire wheeled other items!

Continue reading “Quarantine work!” →

E-Brake and Axle restoration continues!

Posted on March 19, 2020April 18, 2021 by Britt

E-Brake and Axle restoration continues!

This week was a bit slow, but lots of little things done including the continued restoration of the original e-brake system, lots of sandblasting, and painting/putting back together the very first part of the wartime axles!

Continue reading “E-Brake and Axle restoration continues!” →

Warbirds, EBrake, and new License Plate!

Posted on March 12, 2020April 18, 2021 by Britt

Warbirds, EBrake, and new License Plate!

This past week the Jeep went on another adventure, this time to Chino Airport to have some photos taken with warbirds and around Cal Aero Field. Also, I continued work on the restoration of the Emergency Brake for the Jeep and finally got in my custom license plate!

Continue reading “Warbirds, EBrake, and new License Plate!” →

More axle work

Posted on March 5, 2020April 20, 2021 by Britt

More axle work

After last week’s excitement, this week was much more calm. This week I continued to clean/disassemble the wartime GPW axles and sandblast various parts documenting F stamps along the way. I also started to restore parts of the emergency brake and checked the PCV valve for carbon/fuel buildup.

Continue reading “More axle work” →

The Jeep goes public!

Posted on February 27, 2020March 18, 2021 by Britt

GPW #208102 at the Los Angeles Air Raid of 1942 event

The Jeep goes public!

This week the Jeep made the first public appearance at an event in San Pedro, CA for the LA Air Raid of 1942! Then the next day the Jeep went to Old Towne Orange, CA for a mini-photoshoot in the area. Overall a great outing with lots of photos! Restoration wise, I was only able to get a little bit of sandblasting in and fixing a broken panel light switch.

Continue reading “The Jeep goes public!” →

Tire Pump, LED Brake Light Conversion, and more!

Posted on February 20, 2020April 21, 2021 by Britt

Tire Pump, LED Brake Light Conversion, and more!

A full week of work since the last update, this week I was able to finish the tire pump restoration project and mount it to the rear seat on my Jeep. I also had my brake light burn out, so I decided to convert it to LED using the original lens! Finally, I sandblast some of the axle items I took off last week and begin to take apart my emergency brake. Finally, I have been prepping the Jeep for its first adventure coming this Saturday!

Continue reading “Tire Pump, LED Brake Light Conversion, and more!” →

Tire Pump, Floor Mats, and Axle work!

Posted on February 13, 2020April 21, 2021 by Britt

Tire Pump, Floor Mats, and Axle work!

Another week working on several Jeep projects! This week I finished the last steps in the Tire Pump restoration, it’s ready to mount. Also, I may have found the perfect solution to floor mats for the Jeep. Finally, I am almost finished taking apart the axles for their restoration and discover more F stamps along the way.

Continue reading “Tire Pump, Floor Mats, and Axle work!” →

Axle work, restoring the tire pump, and more!

Posted on February 6, 2020April 25, 2021 by Britt

Axle work, restoring the tire pump, and more!

Last week I was on vacation, so here’s a 2-week large update featuring the restoration of a WW2 tire pump for the Jeep and continuing work on taking apart the front wartime GPW axle! Lots of F stamps, grease, and neat discoveries!

Continue reading “Axle work, restoring the tire pump, and more!” →