Tag: rear axle
Clackity Saga update and new testsThis is a short update for this week as I only worked on the Jeep a little bit getting back to trying to figure out the clackity issue on the rear axle. Next week will be a bit more busy as I work on some new tests to, hopefully, solve this ongoing issue!
Axle Saga Continues and a Speedi Sleeve!This week saw a couple smaller projects with some continuing work on trying to find the mysterious clackity sound from the rear axle with some interesting conclusions. After seeing gear oil slung all over the bottom of the body tub, I decided to speedi sleeve my rear axle yoke to make it brand-new like! Includes a full speedi sleeve tutorial. Finally, I adjust my gas pedal linkage, start construction of a ‘sign’ display, and get the brake drums honed!
Second GPW Rear Axle… Does it make a sound?Finally, after about three weeks of work I’ve finished the SECOND GPW wartime axle… but the big question is: Does the mysterious clackity sound from the first GPW axle go away? Find out in this update along with some video links from the new GoPro!
Continue reading “Second GPW Rear Axle… Does it make a sound?”
Rear axle work, axle dating, alternator enhancements, & more!After last week’s difficult task of setting the ring and pinion (which continued this week, but it’s finally ‘mostly’ set, so I’ll add more thoughts on the process) I took some time this week to figure out the rough timeframe of the axles after some research, getting the U bolts ready, an infuriating setback with the driveshaft, adding a final touch to the ‘generator’ alternator, and more!
Continue reading “Rear axle work, axle dating, alternator enhancements, & more!”
Rear Axle Wars – Episode 7: A New HopeWith the rear axle clackity issue eluding myself and many other trying to help me out, I’ve decided to go in a different direction and restore ANOTHER wartime GPW rear axle to replace the one I restored. Join me over the new few weeks as I restore and rebuild this axle and hopefully, solve the last major issue!
Small Projects and ExtrasWith things at a bit of a standstill as I figure out my next move with the strange rear axle noise, I didn’t do much this week. However, there are several side projects I’ve done the last few months that I’ve yet to cover with the Jeep, so I decided to compile them into this week’s update including a F stamped keychain, wartime Fire Extinguisher and modern Extinguisher, Push-Pull switch tags, and more!
Fire extinguisher, new wheels, F Bolts, and more!This week an uptick with work on the Jeep! From getting a fire extinguisher bracket to four new firestone military tires for the Jeep! Also some more axle work was done (and some good news), replaced some more non-wartime bolts with F bolts, and more work testing out Voltage Regulator inspector stamps!
Continue reading “Fire extinguisher, new wheels, F Bolts, and more!”
More axle workAfter last week’s excitement, this week was much more calm. This week I continued to clean/disassemble the wartime GPW axles and sandblast various parts documenting F stamps along the way. I also started to restore parts of the emergency brake and checked the PCV valve for carbon/fuel buildup.
Tire Pump, Floor Mats, and Axle work!Another week working on several Jeep projects! This week I finished the last steps in the Tire Pump restoration, it’s ready to mount. Also, I may have found the perfect solution to floor mats for the Jeep. Finally, I am almost finished taking apart the axles for their restoration and discover more F stamps along the way.