Ring & Pinions, Jerry Cans, Carburetor, Eye Bolts and more!

Posted on September 10, 2020March 17, 2021 by Britt

Ring & Pinions, Jerry Cans, Carburetor, Eye Bolts and more!

Quite the busy week with lots of busy work on the Jeep! After two days of soaking in fuel, the NOS Ring and Pinion are clean! I continued work on the fire extinguisher decal, and finished the 1943 Jerry can! I replaced the safety strap eye bolts with correct F ones, and replaced the borrowed carburetor with a new one!

Continue reading “Ring & Pinions, Jerry Cans, Carburetor, Eye Bolts and more!” →

Ring & Pinion journey, Fire Extinguisher Decal, and more history!

Posted on September 3, 2020March 18, 2021 by Britt

Ring & Pinion journey, Fire Extinguisher Decal, looking for more history, etc!

This week I finally saw the light of the end of the tunnel trying to acquire a ring and pinion set… which revealed a great surprise! I then attempted to find some more history on my Jeep via the body tub, more work on the Fire Extinguisher decal, and finally finding a wartime jerry can for the Jeep!

Continue reading “Ring & Pinion journey, Fire Extinguisher Decal, and more history!” →

Fire Extinguishers, more Combat Rims, etc.

Posted on August 28, 2020March 18, 2021 by Britt

Post-War SOS Fire Guard Fire Extinguisher

Fire Extinguishers, more Combat Rims, etc.

After last week’s big Combat Rim installation tutorial, this week went by a lot slower. I completed the rest of the combat rims (and I have a few extra notes to mention about them), worked on a post-war Fire Extinguisher, continued the ongoing chronicles of the GPW axles restoration, some ‘artsy’ shots of the Jeep, and more.

Continue reading “Fire Extinguishers, more Combat Rims, etc.” →

COMBAT RIMS & TIRES!

Posted on August 20, 2020March 18, 2021 by Britt

COMBAT RIMS & TIRES!

This week’s update is an exciting one… COMBAT RIMS! I finally have a complete set of Combat Rims to replace the CJ rims on my Jeep, along with the correct Firestone tires! In this update I’ll take you through the entire prepping, painting, and installing Combat Rims on tires! I also added a spare tire lock for the spare tire!

Continue reading “COMBAT RIMS & TIRES!” →

Corsair, Voltage Regulator, Tires, and another Jeep!

Posted on August 13, 2020March 26, 2021 by Britt

Corsair, Voltage Regulator, Tires, and another Jeep!

This week saw quite a bit of Jeep related things… I took the Jeep out to the Air Museum and got some shots with a Corsair, I continued research on the Firestone Tires, finally stamped my Voltage Regulator, and helped to save a friend’s Jeep from rusting worse!

Continue reading “Corsair, Voltage Regulator, Tires, and another Jeep!” →

Fire extinguisher, new wheels, F Bolts, and more!

Posted on August 6, 2020March 28, 2021 by Britt

Fire extinguisher, new wheels, F Bolts, and more!

This week an uptick with work on the Jeep! From getting a fire extinguisher bracket to four new firestone military tires for the Jeep! Also some more axle work was done (and some good news), replaced some more non-wartime bolts with F bolts, and more work testing out Voltage Regulator inspector stamps!

Continue reading “Fire extinguisher, new wheels, F Bolts, and more!” →

The week nothing happened…

Posted on July 31, 2020March 29, 2021 by Britt

The week nothing happened…

This week’s update is going to be a bit small, mostly because I had nothing I could do this week to the Jeep but drive it! With the axles on hold till I get a Ring and Pinion, tires and combat rims on order awaiting arrival, and most small projects done, this week I decided to do another ‘state of the Jeep’ and showcase what’s left to do.

Continue reading “The week nothing happened…” →

More F Stamps, Hand Crank, Windshield Latch, etc!

Posted on July 24, 2020March 29, 2021 by Britt

More F Stamps, Hand Crank, Windshield Latch, etc!

This week saw a lot of little projects including changing more things to F stamps, FINALLY getting a Ford Hand Crank, Flea Market finds, adding my original windshield latch, and more!

Continue reading “More F Stamps, Hand Crank, Windshield Latch, etc!” →

Bolt Changes, Inspector Stamps, and a F Stamp Guide!

Posted on July 17, 2020March 30, 2021 by Britt

Bolt Changes, Inspector Stamps, and an F Stamp Guide!

After the very big update last week with the engine head change, this week was quite light. I changed out the last two hex bolts with the correct style recessed head bolts, continued work on finding the perfect way to put an inspector stamp on the Voltage Regulator, and since the update is so short, I thought I’d put together an external F stamp visual guide!

Continue reading “Bolt Changes, Inspector Stamps, and a F Stamp Guide!” →

Wartime GPW Head exchange!

Posted on July 12, 2020March 30, 2021 by Britt

Wartime GPW Head exchange!

Finally, after so many delays it just got to be silly, the Jeep is back up and driving again! In this extra-long update, I go through the entire process of changing out my CJ2 engine head to a wartime GPW head! That includes adding the correct studs, bolts, a GPW thermostat, and a copper gasket. It’s been a multi-week project! I also continue replacing bolts with correct recessed head bolts and replace one of the top bow brackets with a GPW one. Plus several other things!

Continue reading “Wartime GPW Head exchange!” →