Tag: gpw

Sarge from Pixar’s Cars in Walt Disney World

Posted on by Britt
Sarge from Art of Animation Hotel in Walt Disney World

Sarge from pixar’s ‘cARs’ IN WALT DISNEY WORLD

I’ve been on vacation this last week, and while I did get a lot of axle work done, I’ll be posting all the photos from the work next week in a double post! But, while on vacation I ran into a life-size ‘Sarge’ from the Cars movie series. Pretty awesome to see, and just about real-life size at the Art of Animation Resort in Walt Disney World, Florida. The details on Sarge are pretty amazing considering he’s from an animated movie, with a trailer socket, reflectors, correct bolts for the crash pads, and lots more. Here’s a series of photos of Sarge! If only I could pose my Jeep next to him! Till next week!

Continue reading “Sarge from Pixar’s Cars in Walt Disney World” →

More Axle work, a tire pump, and more!

Posted on by Britt
GPW Ford Tie Rod

GPW Ford Tie RodMore Axle work, a tire pump, and more!

Looks like for the next few weeks I’m only going to be able to work on some weekend days and Mondays as weekdays have gotten busy! But even then, still got a lot of work done taking apart the axles this week. Follow along as I take apart various items on the front axle and hunt for Ford F stamps! Also prepping for a tire pump headed my way and a nice flea market find!

Continue reading “More Axle work, a tire pump, and more!” →

More Axle work and a look at what's left

Posted on by Britt
GPW #208102 Jeep

GPW #208102 JeepMore Axle work and a look at what’s left

This week was a bit slow again, and I only got to work on the rear axle disassembling it more checking it out. I discover several Ford F marks, and see what condition the brakes are in. At the end of the post after some shots of the Jeep while out driving, I break down what’s left to do on the Jeep till I can say I’m pretty much ‘done’. While the overall restoration is finished, there’s still plenty left to do!

Continue reading “More Axle work and a look at what's left” →

Little Projects and more Axle work

Posted on by Britt
GPW Trailer Socket

GPW Trailer SocketLittle Projects and more Axle work

This past week was a little slow with Jeep work, but managed to get in some work on finishing the installation of the trailer socket, adding a filter to the oil filter, and continuing work disassembling the GPW axles.

Continue reading “Little Projects and more Axle work” →

Markings are finished!

Posted on by Britt
Jeep Hood Marking Stencils

Jeep Hood Marking StencilsMarkings are finished!

As the New Year quickly sped past, the Jeep as entered what I’d call the final phase for the restoration and it so close to being ‘done’ that it shouldn’t be much longer now with the small projects left. This week I was able to work quite a bit on the Jeep, with the last markings being put on, continuing work on the GPW axles, and starting work on adding the trailer socket shield.

Continue reading “Markings are finished!” →

New Oil Filter and more markings!

Posted on by Britt
GPW #208102's Engine

GPW #208102's EngineNew Oil Filter and more markings!

Hope all had a great Christmas! It’s been two weeks since the last update, and while I’ve been quite busy with various things keeping me away from the Jeep, I managed to get a lot of work in here and there spread out, especially restoring a new oil filter for the Jeep and applying the correct Ford decals! This is the type of work I really enjoy doing.

Continue reading “New Oil Filter and more markings!” →

Valve Work and first Markings!

Posted on by Britt
L134 Engine Valves

L134 Engine ValvesValve Work and first Markings!

After last week’s not-so-good adjustment of the valves, I tackled it again this past week to much better results. Also, another milestone as the very first USAAF markings have been applied to the Jeep! Plus a walk around of the Jeep and what markings still need to be added.

Continue reading “Valve Work and first Markings!” →

Return of the Starter

Posted on by Britt
GPW Engine

GPW EngineReturn of the Starter

It’s December! This week saw a lot of work, including the replacement of the cracked intake manifold (see last week’s update), the return of the rebuilt starter, fixing the toolbox lids, and more!

Continue reading “Return of the Starter” →